PRODUCTS |
||
 |
||
|
||
|
||
|
||
|
||
|
||
EASY GUIDE - FIND BY USE |
||
For product ordering and further information on pricing and availability please contact Canadian Construction Products
|
||
| Epoxies and Urethanes | |||||
 |
|||||
| Miton 414 Quick Set Epoxy | |||||
| PDS MSDS |
Miton 414 quick setting flexible epoxy is a specially formulated two component multi resin flexible epoxy. It has incredible adhesion properties and limitless applications. Excallent for use on terrazzo, concrete, wood, metal, and as an epoxy adhesive, non-skid floor covering, decorative epoxy aggregate floors, concrete patching, self levelling joint material. Miton 414 dries in 2 hours and is ready for traffic in 5 hours. | ||||
|
|||||
| Miton 514 Flexible Epoxy | |||||
PDS |
Miton 514 is a slower setting version of 414. 514 is open to foot traffic in 5 hours and ready for mechanical loading in 5 days. This slower setting version has increased time frames for working time. | ||||
|
|||||
| Miton 518 Low Viscosity Injection Resin | |||||
PDS |
Miton 518 is a low viscosity injection resin with a 7 to 8 hour pot life. This injection epoxy is moisture resistant and it's extended pot life ensures deep penetration using low pressure injection. Miton 518 exhibits good compressive and tensile strengths with minimal flexibilty. |
||||
|
|||||
| Miton 525 Clear Epoxy | |||||
| PDS MSDS |
Miton 525 is a clear (colourless) version of Miton 414. This epoxy is excellent for clear coatings on marble and ganite tops along with most other uses related to 414. 525 clear quick setting epoxy cures to a shiny, high gloss, tough finish. | ||||
|
|||||
| Miton 700 Urethane Chemical Grout | |||||
| PDS MSDS |
Miton 700 urethane injection resin is designed to repair leaks in masonry and concrete structures. It forms a flexible gasket or plug in the leakage path. 700 exhibits excellent resistance to chemicals and it's flexibility allows it to resist degredation through expansion and contraction due to temperature and loading for long periods of time. Miton 700 will stop active leaks. | ||||
|
|||||
| Miton Silane-Siloxane Sealers 8-40% | |||||
| PDS MSDS |
Miton sealers are available in varying solid contents (8%, 15%, 20%, and 40%) suitable for the application required. Silane - Siloxanes are clear solvent based solutions formulated for use on concrete and brick to provide a water repellent natural finish. The solution flows like water to ensure deep penetration to the applied surface. The natural finish and texture is retained, non-gloss finish, will not peel or flake and allows the substrate to breath. | ||||
|
|||||
| Miton Thixotropic Epoxy Paste | |||||
PDS |
A thixotropic epoxy paste for fast setting, long lasting, moisture insensitive concrete repairs. This product can be applied to verticle and overhead structures at over 1 inch thick. Miton's paste epoxy can be trowelled in place to a semi smooth finish. |
||||
|
|||||
| Tapecoat Seapoxy IV | |||||
| PDS MSDS |
Coming Soon | ||||
|
|||||
| E-poxy #4 Injection Resin | |||||
PDS |
EVA-POX® INJECTION RESIN No. 4 is a two component, 100% solids, non-shrink, moisture insensitive epoxy resin system that has a unique High Modulus of Elasticity. Eva-Pox® Injection Resin No. 4 is a low viscosity material ideal for use in the grouting of manufacturing equipment, bridge piers, or other load bearing applications. Eva-Pox® Injection Resin No. 4 was specifically designed for the structural repair of concrete, steel or wood through epoxy metering equipment, such as the “58-P Pulse Force Injection Machine”. | ||||
|
|||||
| E-poxy #5 Low Viscosity Injection Resin
|
|||||
| PDS MSDS |
EVA-POX® LOW VISCOSITY INJECTION RESIN No. 5 is a two component, 100% solids, non-shrink, moisture insensitive epoxy resin system. It is an ultra low viscosity material, ideal for grouting areas that difficult to reach. The product is specifically designed for the structural repair of hairline cracks in concrete, wood or steel through pressure injection or gravity. It can be used in epoxy metering equipment, such as the “58-P Pulse Force Injection Machine”. | ||||
|
|||||
| E-poxy #36 Flexible Injection Resin | |||||
PDS |
EVA-POX® ALL-TEMPERATURE FLEX RESIN No. 36 is a 100% solids, low viscosity, non-shrink, two component flexible epoxy system designed for application on frost-free surfaces as low as 30°F (-1°C). It is capable of forming very high bond strengths, remains flexible and resists most mild, non-oxidizing acids and alkalines. It forms an impervious barrier to guard against contamination from moisture and corrosive chemical penetration. These characteristics make the No. 36 Flex Resin ideal for concrete sawcut joints and control joints. It is NOT designed for use as an expansion joint. It can be injected into cracked concrete where flexibility and waterproofing is required. Under Technical Supervision, it can be injected into wood beams for repair of rotting or termite infestation damage. | ||||
|
|||||
| E-poxy #1 Bonder | |||||
PDS |
EVA-POX® BONDER No. 1 is a 100% solids two component, moisture insensitive modified epoxy adhesive designed for bonding cured concrete to steel, cured concrete, wood and many other construction materials. EVA-POX® BONDER No. 1 is the primary bonding agent for e-poxy engineered materials’ Ceva® Expansion Joint Systems. The product is suitable for applications at temperatures down to 38°F (3°C). Meets ASTM C-881, Type I, Grade 2, Class B & C. For colder applications or if a faster set is required, use Eva-Pox® Cold Cure Bonder #41. | ||||
|
|||||
| E-poxy Cold Cure Bonder | |||||
| PDS MSDS |
EVA-POX® COLD CURE BONDER No. 41 is a 100% solids, two component modified epoxy adhesive designed for bonding cured concrete to steel, cured concrete, wood and other construction materials. The product is applicable at ambient temperatures as low as 20°F (-7°C) on frost-free surfaces. Meets ASTM C-881, Type II, Grade 2, Class A. | ||||
|
|||||
| E-poxy #22 Paste | |||||
PDS |
EVA-POX® EPOXY PASTE No. 22 is a 100% solids, two-component, moisture insensitive, highly thixotropic epoxy paste. It can be troweled onto vertical and overhead surfaces 2" to 3" (5 cm to 8 cm) thick without sagging or slipping during cure. This material has excellent adhesion to new or old concrete, steel, wood and damp surfaces. The material is flexible enough to eliminate cracking or bowing due to shrinkage and thermal cycling stresses. Recommended for applications above 50°F (10°C). Meets ASTM C-881, Type II & VII, Grade 3, Class B & C. | ||||
|
|||||
| E-poxy #45 Cold Cure Injection Resin | |||||
PDS |
EVA-POX® COLD CURE INJECTION RESIN No. 45 is a two component, 100% solids, non-shrink, moisture insensitive epoxy resin system. It is especially formulated for application at low temperatures, down to 0°F (-18°C), or where conditions dictate a rapid set time. The 100% reactive, non-shrink system is designed for strength and is formulated to meet ASTM C-881 specification Type I, Grade 1, Class A. | ||||
|
|||||
| E-Poxy Underwater Bonder #47 | |||||
| PDS MSDS |
EVA-POX® UNDERWATER BONDER NO. 47 is a 100% solid, moisture insensitive, two component modified epoxy bonder. It was developed specifically for bonding cured concrete to steel, cured concrete and wood, as well as many other construction materials in wet or underwater conditions. The bonder also offers excellent corrosion protection, resistance to abrasion and withstands the destructiveness of freeze-thaw cycles. The system is applicable to wet or dry surfaces at 40°F (4°C) or higher. Meets ASTM C-881, Type I, Grade 2, Class B and C. | ||||
 SITE MAP |
ABOUT US |
OUR CUSTOMERS |
COPYRIGHT 2006 |